Toilet flushing cistern
Toilet flushing cistern
Toilet flushing cistern
The common defects to toilet flushing cistern
· They spring brakes in they siphon
· They thin plastic in they piston slips
· They hook to they handle snaps
Materials
· Siphon £40 (1)
· Different type of siphons
· There is different type of systems
Tools
· Buckets
· Raticht
Dust sheet
Screw driver (flat head)
Dust sheet
Screw driver (flat head)
PPE
· Boots
· Goggles
· Gloves
Risk assessment
· Cuts to hands(low risk)
· Objects falling and getting sharp fragments in eye(high risk)
· Objects falling on feet(high risk)
We shall wear the correct PPE to prevent these types of risks that we have mentioned. To stop cuts wear gloves will installing toilet
flushing cistern , to prevent sharp bits getting in eye must wear
goggles all times if in case you do drop they tank and last must wear
boots to stop your feet getting crushed will also do al they work to
they health and safety act of 1974.
Method statement
We turn up and start to put on the correct PPE then we check what needs to be replaced in your toilet
flushing cistern it is a siphon that needs to be because they spring
has broken and need a whole new siphon. So I flush all water out of they
tank then get al water out and then ripped out they old one and
installed the new one and check if any leaks then just finish of any touches and clear away ( plus clearness ).
Quote
Dear customer
· We have inspected they toilet flushing cistern and found you have a problem with your siphon.
· Next I got rid of any left water in they tank then unlisted they siphon.
· We then removed it all and then put they new one back in they same place and put handle back on.
· Then we refilled they area in they tank and tested it will flush well and work.
· Then cleared all away and finished they job.
Times
4hurs
Coast
They coast of all they materials, skip and job will coast £320
• Materials £40
• Lader £20 per hour
• Overhead (petrol,PPE,permit) £200
Total cost £320
Comments
Post a Comment